3D Wheel Aligner

Model NO.: FSD-300Z Certification: CE, ISO Structure: Electronic Condition: New Trademark: FSD(FOSTAR), ZHZY, ZHZF Origin: Zhuhai Type: 3D Wheel Alignment Communication Mode: ZigBee Wireless Communication Standard: Standard Colour: Blue, Red, Yellow, White, Green Specification: 3000x350x300,870x720x1100,520x460x320,800x600x500 HS Code: 90318090

FSD-300Z
3D Wheel Alignment
dynamic constitute
coordinate,no affected
by the inclination of lift
classic design,brand
computer,classical
cpmfigiratopmFSD-300Z is my company's new launch of a better cost-effective a 3D car four wheel positioning machine. : Its main features: 1.,. The 1 column is made of aluminum alloy square tube, and the surface anodic oxidation treatment. 2.0.01; 2 accurate positioning accuracy to 0.01; 3.35; 3 cameras can work within 35 degrees below zero; 4.500,; 4 camera with 5 million phase element, over the horizon measurement; 5.:12; 5 camera detection range: 12 meters; 6.:30/; 6 cameras to deal with image speed: 30 / sec; 7.3. 7 to detect the trolley time only 3 seconds.  Product introduction 7075.
Guan Jian pieces of this product: the camera and the lens using SONY technology, reflective board without any electronic original device, its rear cover using 7075 aerospace aluminum alloy material production.
:Guan Jian pieces of this product: the camera and the lens using SONY technology, reflective board without any electronic original device, its rear cover using 7075 aerospace aluminum alloy material production.
:The installation range: 1.6--3.1 meters.
Relative humidity: 3550 degree.
Relative humidity: less than or equal to 85%.
Optional: Black reflector, interchangeable reflector, small front big reflector.
The standard reflector size as reflector pattern before and after.
This machine uses high speed import SONY camera, 5 million phase element, the camera working speed to 30 out of phase speed work per second. Reflector panels have a variety of patterns, software vision calibration accuracy: 0.02mm.
A calibration before leaving the factory, no need to re calibrate. Cart time only takes 3 seconds.
The main technical parameters are as follows:




Detailed product description



1, measurement of the fastest four wheel positioning (with cart interface) cart process 3 seconds, after the stop time is only one second 0.2 The whole time 0.2 seconds to update the data once

2, the most accurate measurement of the four round of the positioning of the instrument

Accuracy up to the standard of the international brand, hope that professional users can provide positioning service for the intermediate vehicle

3, the best domestic repeat of the 3D four round of the round of the number of repeated measurements to achieve the international top brands (put two pictures, is the value of the two measurement)

4, adjust the steering wheel thrust line positioning principle of convenient efficient and convenient put the steering wheel (two)

Picture, a steering wheel slanting, one is right

5, a comprehensive measurement of camber angle toe kingpin caster kingpin inclination tread wheelbase diagonal tire rolling radius (a group of pictures screenshot)

6, lifting machine is not on the impact of uneven (schematic)

7, after measuring the stability of the most far away from the camera 8 - 7 meters still can be measured (pictures, put away after the)

8, lifting adjustment can be under the vehicle lifting the state claim easily the camber of the vehicle solution and inclination of adjustment (screenshot, lifting raised)

9, the unit of arbitrary switching degree of sub millimeter per cent between arbitrary switching to facilitate a variety of operating habits (screenshot, before and after conversion)

10, the static measurement function convenient but the accuracy is not high, only for in the measurement requirements of the vehicle, nor has the function of adjust the direction of the

11, two can locate the function only needs to hang the two to be able to locate the dish to be convenient and quick, but is unable to swing the steering wheel

12, the latest volume of the database to meet the needs of various regions of the country to use the device (database image)

13, up to the choice of the target before the target (a variety of target can choose or customize)

14, Epad PAD can sync, 1 easily shunting save labor cost '' to

15, the public Audi Passat special adjustment software, to facilitate the right to send (synchronized picture: computer and)

16, the use of background equipment management, you can record the daily use of the device (display the contents of the document)
The requirements of this machine environment are as follows:
Temperature: -35-50 degree
Relative humidity: < 85%
Product features
1 camera uses the import original Sony camera, camera and lens (500 million, the camera response speed and performance in the industry supergroup, 30 per photo speed, static detection technology is applied to machine precision in detecting data is less than 0.1 mm and 0.1 degrees.
2 machine software for independent research and development, support a variety of standard plate reflectors, reflective panels support black interchangeability.
3 standard reflector imported super reflective film, made by 7075T6 aerospace aluminum material, durable. This Guan Jian warranty for five years.
The 4 beam for Aluminum Alloy, column steel self adjustable height, easy to use.
5 standard: crossbeam assembly, reflector assembly and box assembly, computer assembly.
6 computer display standard: 19 inch. (the printer and the speaker are selected by the customer)
Enterprise advantage:
1 independent intellectual property rights, future opportunities for sustainable development.
2. Its 3D four wheel positioning main components supporting brand are companies in which the company's products and brands, such as cabinet, aluminum alloy column, aluminum alloy beams, electrical components, computers, televisions, monitors, a reflector and fittings, so the quality control in full compliance with ISO9001 quality system standards and CE standard export.
Product performance:
1 using the world's most advanced three-dimensional image measurement technology, the accuracy of 0.01, measurement of the car to achieve a variety of data angle of 0.1 degrees or less than 0.1 mm;
2 measurement of long wheelbase and a variety of global and real estate cars and trucks;
3 this device supports the installation of the minimum installation distance 1.4m, maximum installation distance 3.1m (distance between the camera to the front wheel steering wheel center line between the center of the ground distance), the farther the distance, the better;
4. The equipment for large trucks (Auman, Steyr, hanging, etc.) can not be the direct use of the existing fixture positioning, can only be used increase truck fixture wheel alignment, not including according to the dimensional series products and transit and coaster middle bus. The final explanation right belongs to the Zhuhai fostar machinery equipment Co., Ltd.;
5 because the software technology of anteriority: This equipment adopts the reflection of various forms of target for customer choice, which reflect the different patterns of different varieties of the target of choice for customers, supporting four standard plate like to distinguish around in the form of high-end facilities for four in the same size with the reflection properties of swap targets the machine adopts the imported SONY high-speed photography system, the low temperature performance of the camera ranks the first in the same industry, the equipment can be minus 35 degrees to 50 degrees above zero within the scope of work, the working performance of the camera ranked first in the same industry, phase machine to 30 photos per second speed camera and computer analysis the data transmission signal, software to remove the reflecting plate to support a variety of reflector and a variety of patterns, while supporting the cart and cart system, so the original sales of products such as the need to update a guest Do not need to push the system can be achieved, the software vision calibration accuracy: 2 microns;
6. The machine factory before a calibration, without the needs of re calibration, reflector using high-quality imported 3M reflective material film by special processing production and manufacturing processes, the shell with rugged aerospace aluminum alloy materials in Al-7075;
7. According to the different division of different matching pieces and box column for different varieties of brand series product model, which fushida series products standard supporting for four plates are the same size and significant characteristics for single display and dual display;
The 8 Zhuhai brand as the reflector before using the small after the formation of large series of products not characteristic;
9 among them, the Zhuhai war peak brand using black series of reflective board to form its unique features of the machine;
10. Software is easy to operate, 3D display operation steps, camera detection adjustable mode. According to different site light can turn on the camera display debugging interface to increase and decrease the camera gain and a brightness value to improve the accuracy of the machine itself.
11 best camera and optical system in the industry;
12 can provide multi language multi language software;
13 automatic definition of the model database, fast search;
14 work four point round clip for standard matching: 10-23";

Contact us if you need more details on 3D Wheel Aligner. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wheel Aligner、3D Wheel Alignment R & D. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : 3D Wheel Alignment