Road Buck 2.0 Software G581 Wheel Alignment Machine for Sale

Car Angle

Alignment angles can also be altered beyond the maker's specifications to obtain a specific handling characteristic.

How to know if your car is out of alignment:

1. Have your car checked if you notice.
2. Excessive or uneven tire wear
3. Steering wheel pulls to the left or right
4. Feeling of looseness or wandering
5. Steering wheel vibration or shimmy
6. Steering wheel is not centered when car is moving straight ahead

Camber: Tire angle, pointing toward or away from the axle.

Toe: Direction tires point, relative to each other.

Caster: The degree that the steering axis is tilted as viewed from the side of the car.

1. Pushing Measurement: Backward pushing mode, most of the data can be test out once.

2. Original Vehicle Database: Owing more than 20,000 original vehicle databases from

 different region around the world.

3. King Pin Measurement: It can accurately measure the vehicles' caster and kingpin

inclination.

4. Measurement results display: Can switch to different interface according to customers' requirements.

5. Jack-up Adjustment Function: It's convenient for operator to jack up vehicles and adjust camber.

6. Wheel Rolling Radius Measurement: To help operator accurately judge the status of tire pressure and tire wear.

7. Unique calibration Function: Can detection and correction the out-of round phenomenon during the target disk and clamp in use.

8. Body Size Measurment: Detect the vehicle chassis wheelbase, wheel track data, etc., can help customers to understand the real condition of the vehicle chassis.

1. What is wheel alignments?

Wheel Alignment (or"tracking") refers to the angle and direction at which the tyres are set.

Hitting kerbs or driving at speed through a pothole can result in wheel misalignment. Poorly aligned tyres can afect road holding, increase fuel consumption and decrease the life of your tyres.

2. How do i know if my wheels need to be aligned?

Watch out for these classic signs of wheel misalignment:

 a. Uneven tyre

b. Steering wheel pull (the steering wheel pulling to the left or right when driving on an even surface)

3. Can we hang the cross bar at the roof or wall, so that space can be saved / because we 

have a space constraints.

we have the hanging type which can hang the camera beam at the roof.

4. Warranty Policy and Terms.

The machine warranty is one year(except man-made damage).

 and if there is any question about the machine or software, we can offer help by mail, 

phone call, or online tools like skype, teamviewer, whatsapp etc.

5. Do we need to calibrate for the machine?

The machine only need one calibration and it finished calibration before leaving the factory,  because no periodic calibration needed, you don’t need to calibrate again.